Metalwork that fits
the first time,
every time.
Steelshift Technologies builds custom enclosures, cabinets, kiosk frames and press components in north Bengaluru. Cutting, forming, welding, finishing and assembly all happen in one building — so a drawing is read once, and a correction takes a shift instead of a week.
- Cutting tolerance
- ±0.1mm
- Press capacity
- 500tonnes
- Minimum order
- 1piece
- Quotation in
- 24hours
Built here.
Photographed here.
Enclosures, cabinets and kiosk frames delivered to customers across Bengaluru and the rest of India. Nothing below is a stock photograph.
-
Electrical Electrical Distribution Panel Enclosure
IP-rated powder-coated distribution panel enclosure with CNC-punched cable entries, formed and welded from 1.6–2mm CRCA sheet.
-
Kiosk Self-Service Kiosk Metal Frame
Free-standing kiosk chassis for digital payment and information terminals, with concealed cable routing and serviceable rear access.
-
Medical Medical Diagnostic Console Enclosure
Diagnostic console housing built to clinical finish standards, with smooth deburred edges and vibration-tested mounting points.
-
Medical Stainless Steel Medical Equipment Cabinet
SS 304 clinical storage cabinet with soft-close drawer runners, hygienic radiused corners and a wipe-down surface finish.
-
Medical Medical Cabinet Side Panel Detail
Side elevation showing flush-fit panel joints and consistent bend radii achieved on CNC press brakes.
-
Medical Medical Cabinet Drawer Assembly
Drawer box assembly with telescopic slides, fully deburred internals and load-tested to clinical duty cycles.
-
Medical Medical Enclosure Precision Detail
Close-up of laser-cut apertures and countersunk fixings, cut to ±0.1mm before forming.
-
Medical Medical Trolley Sheet Metal Enclosure
Mobile equipment trolley enclosure with castor-mount reinforcement and a chip-resistant powder coat.
-
Medical Clinical Equipment Metal Housing
Instrument housing fabricated to customer CAD, with ventilation slots and connector cut-outs punched in a single setup.
-
Factory Enclosures Delivered to Customer Warehouse
A batch order staged at the client warehouse — repeat volume production held to identical fit and finish.
-
Factory Fibre Laser Cutting CNC Machine
In-house fibre laser cutting for mild steel, stainless steel and aluminium — clean dross-free edges at 0.1mm tolerance.
-
Factory CNC Press Brake Bending Area
Hydraulic press brake line producing repeatable bend angles across long production runs.
-
Factory MIG & TIG Welding Process
In-house MIG, TIG and spot welding producing clean seams that survive dressing and finishing without rework.
-
Factory Assembly & Powder Coat Touch-Up
Final assembly, dimensional inspection and powder-coat touch-up before every dispatch.
Eight processes.
No handovers.
The entire chain sits under one roof. That is the whole proposition — every step below happens here, and none of it is passed to a second shop between cutting and dispatch.
-
01
Fibre laser cutting
Mild steel, stainless steel and aluminium cut to ±0.1mm on cut features, with dross-free edges that need no secondary clean-up before forming.
±0.1mm is a cutting tolerance on the flat blank.
-
02
CNC press brake bending
Repeatable bend angles and consistent internal radii held across a production run, so the hundredth part stacks like the first.
Bend allowance worked out from your material and thickness.
-
03
CNC punching
Ventilation slots, cable entries and mounting patterns punched in a single setup, which keeps hole-to-hole positions true across the panel.
Single setup means no cumulative re-fixturing error.
-
04
Press work and forming
Blanking, deep drawing and custom forming with press capacity up to 500 tonnes, for parts that are pressed rather than cut and bent.
Tooling and DFM discussed before any die is cut.
-
05
Welding
MIG, TIG, spot and laser welding, with seams dressed so the finish coat lands flat instead of telegraphing the joint underneath.
Seam dressing is part of the job, not an extra.
-
06
Finishing
Powder coating, zinc plating and brushed stainless finishes, colour-matched batch to batch so a repeat order sits beside the last one unnoticed.
Shade and texture confirmed against your reference.
-
07
Assembly
A dedicated in-house assembly team builds complete units — hardware, gaskets, hinges and fasteners fitted, so what ships is finished, not a kit.
Bought-out hardware fitted to your specification.
-
08
Quality control
A separate QC team dimension-checks every batch against the drawing before it leaves, and the report travels with the consignment.
QC is independent of the production line.
From your file
to our floor.
Send geometry in whatever form you have it. If something in the drawing will cost money for no functional gain, you hear about it with the quote rather than after the first article.
Start a quotation- Minimum order
- One piece. A single prototype is a real order here, not a favour.
- Volume
- Prototype through to repeat high-volume production runs.
- Drawings accepted
- DXF, DWG, STEP, PDF — or a physical sample part to work from.
- Quotation
- Returned within 24 business hours of a readable drawing.
- Supply
- Bengaluru, Karnataka and across India.
20+ years in the industry
Steelshift Technologies is a precision sheet metal fabricator in Singapura, north Bengaluru, working from the first floor of the works on 1st Cross Road, Achappa Layout. We supply electrical, electronics, medical, industrial and automation customers across Bengaluru, Karnataka and the rest of India.
The work is unglamorous and specific: hold the cut tolerance, hold the bend radius across the run, dress the seam before it is coated, and check the batch against the drawing before it leaves. Everything here follows from being able to do those four things in one building.
Registered as an MSME. ISO 9001 certification is in progress and not yet held — listed here as a status, not a claim.
Materials worked
Industries served
Detail on each line of work
-
Sheet metal fabrication
Sheet metal fabrication in Bangalore with laser cutting, CNC bending, welding, powder coating and assembly under one roof. Drawings quoted in 24 business hours.
-
Electrical enclosures
Custom electrical enclosures built to your drawing in Bengaluru — distribution panels, control cabinets, busbar boxes and junction switchboards. Quoted in 24 hours.
-
Medical enclosures
Medical equipment enclosures fabricated to drawing in Bengaluru — SS 304 clinical cabinets, diagnostic console housings, trolleys and instrument enclosures.
-
Laser cutting job work
Fibre laser cutting job work in Bangalore — ±0.1mm on cut features, dross-free edges in mild steel, stainless and aluminium. DXF, DWG, STEP and PDF accepted.
-
Kiosk frames
Self-service kiosk chassis and payment terminal frames fabricated in Bengaluru — laser-cut CRCA or SS 304, concealed cable routing, serviceable rear access.
-
Metal cabinets
Custom metal cabinets fabricated in Bengaluru — storage cabinets, tool cribs, server enclosures, SS 304 medical cabinets and custom metal boxes, from one piece up.
Asked before
every first order.
What is the minimum order quantity?
One piece. Laser-cut and bent parts need no die, so a single prototype carries no tooling cost — you pay for material and machine time.
How quickly do you quote?
Within 24 business hours of receiving a readable drawing. If the geometry raises a question that changes the price, you get the question first rather than a padded number.
Which file formats do you accept?
DXF, DWG, STEP and dimensioned PDF. A physical sample part also works when no drawing exists.
Do you handle finishing and assembly, or only cutting?
Every stage runs in this building — laser cutting, CNC punching, press brake forming, press work, welding, powder coating, zinc plating, assembly and QC. Nothing is subcontracted between steps.
Where are you located and how far do you deliver?
The factory is at Singapura, Bengaluru, north Bengaluru, near the Peenya industrial belt. We deliver across Bengaluru and ship across India.
Send the drawing.
DXF, DWG, STEP or a dimensioned PDF. No drawing? Send a photograph of the part with a dimension or two and we will work from that.
- Sales +91 70197 67453
- Email steelshift.in@gmail.com
- WhatsApp +91 70197 67453